This method allows for a 1/2" overlay of cabinet openings. Make sure there is at least 5/8" clearing around all openings.Instructions are based on using Quality Doors #900, 900B or 900C hinges.
 |  |  |
 | ||
• Measure all door openings, including drawer fronts and false fronts, to the nearest 1/8 and write sizes on a scratch pad (F.1 and F.2). To prevent ordering errors, its best to measure each opening twice. DOORS AND DRAWER FRONTS WILL BE CUSTOM - MADE TO THE SIZES YOU SPECIFY. DO NOT ORDER BY OPENING SIZES.
Figuring Order Sizes:
• Add 1 to the width and 1 to the height of each opening size. When figuring ORDERNG SIZE for split door openings (two doors covering the same opening), add 1 to the height; then add 1 to the width and divide by 2 and subtract 1/1 6. This allows for 1/8 gap between doors. Enter final sizes on order form.
Split Door Example: 36+1=37, 37๗2=181/2, 181/2-1/1 6=187/1 6
ORDER TWO DOORS TO COVER ANY OPENING MORE THAN 22 WIDE.
Ordering:
• Use the order form to enter actual custom sizes you wish to order.
Mullion and Frame Only Doors: Glass not included with Mullion or Frame Only Doors.
• On the order form under options, enter(FO) for frame only, enter(ML) for mullions plus the number of lites (openings). See example below.
| Quantity | Design # | Edge # | Options |
 | |||
6 | 301 | 119 | ML4 (mullions with 4 lites) 2BR 4BL (2 doors bore right, 4 doors bore left) |
2 | 300 | 119 | FO (frame only) |
1 | 716HV3 | 191 | ML6 (mullion with 6 lites) BR (bore right) |
1 | 504 | 115 | ML4 (mullion inserts 4 lites) |
When ordering special designs:(#389,#388,#382), indicate door design and edge design along with numbers of lites (openings).
• Lazy Susan or special edge doors: Indicate requirements under options and attach a special note on ordering form.
• Boring for arched doors (like door design #301): Indicate under options (BL)bore left (hinge on left),(BR)bore right (hinge on right), (BP) bore in pairs. See example below.
 |
 |
 |  |  |
